Beehive Garden™

The The BeehiveTM Grow Zone is available in various height profiles of 185mm, 230mm and 290mm these sizes come as a flat pack, cells are also available as a pre-bent 390mm and 580mm heights these are available to order. The lower height profiles (up to 290mm) are best used as ‘Dig’ gardens on existing lawns or your garden area.

Each cell is 1.4 m in width and 1.6m from apex to apex each side is 810mm long .The higher profiles (290mm-580mm) are best used as ‘No Dig’ gardens and can be installed on any surface you choose,
whether it be lawn, concrete, paving, decking or rooftop. Ensure there is good sunlight, & appropriate conditions for your climate.

What's in the Beehive Garden kit?

You will receive:
• 2 lengths of pre-formed FormBoss™ in your required Beehive Profile height.
• 2 connectors.
• self drilling tech screws
• a 120º template.

What you need:
• Electric or cordless drill with a tech screw driver
• A block of wood
• Clamps if available

Assemble on a hard surface with the curved lip face down.

Kitscape’s partner Greenlines Gardenware will assist you with your order. Select from the above table, and be sure to quote item code.

Contact kitscape@greenlines.com.au or phone 1300 307 542.